产品资料

供应美国泰克TCP0150 交/直流电流探头

如果您对该产品感兴趣的话,可以 sendmsg
产品名称: 供应美国泰克TCP0150 交/直流电流探头
产品型号: TCP0150
产品展商: 美国泰克
产品文档: 无相关文档

简单介绍

供应美国泰克TCP0150 交/直流电流探头 供应美国泰克TCP0150 交/直流电流探头 使用新的TekVPI?探头接头,直接连接到DPO7000系列、DPO4000/DPO4000B系列、MSO4000/MSO4000B系列、MSO5000/DPO5000 系列示波器上


供应美国泰克TCP0150 交/直流电流探头  的详细介绍

供应美国泰克TCP0150 交/直流电流探头


产品特点

容易进行高精度AC/DC电流测量,操作简便,直流电流精度典型值≤1%;
带宽DC~20MHz,电流从±5mA到150A有效值,可满足大电流和小电流测试需要;
具有自动匹配刻度单元,并在示波器显示屏上读出;
在ATE设备通过GPIB接口可进行远程编程;
容易退磁和自动归零。
适用示波器型号:DPO4032、DPO4034、DPO4054、DPO4104
MSO4032、MSO4034、MSO4054、MSO4104
部分DPO7000系列示波器。

Features & Benefits

Easy to Use and AccurateAC/DCCurrentMeasurements
Connects Directly to DPO4000, MSO4000 andDPO7000SeriesOscilloscopes Using the TekVPI Probe Interface
DC to 20 MHz Bandwidth
150 A RMS Maximum Current Capability
500 A Peak Pulse Current Capability
High Accuracy with Typically Less than 1% DC Gain Error
Accurately Measures Current levels as low as 5 mA
Low Noise and DC Drift
Provides Automatic Units Scaling and Readout ontheOscilloscope'sDisplay
Remote Programmable GPIB Control for ATE systems
Split-Core Probe Head Construction Allows EasyConnectiontoConductors
Easy to Degauss and Autozero
Setup Controls and Probe Status and DiagnosticIndicatorsareProvided on Both the Probe Hardware and via anEasy-to-AccessScopeUI Display Menu

Applications

Power Supplies
Semiconductor Devices
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Motor Drives
Transportation Systems

Note:RequiresDPO7000SeriesFirmware Version 3.0.2 or greater.RequiresDPO4000/MSO4000Firmware Version 2.06 or greater.

TCP0150 is a high performance and easy-to-use150AAC/DC current probe designed for use and directconnection(withoutthe need of an additional power supply) to theTekVPI™probeinterface used on Tektronix DPO4000, MSO4000 andDPO7000Seriesoscilloscopes. This AC/DC current measurement probeprovides20 MHzof frequency bandwidth with selectable range controlfor 25A and 150A measurement ranges. It also provides lowcurrentmeasurementcapability and accuracy to current levels as lowas 5mA per division— important for achieving broad dynamiccurrentrange of high-leveland low-level measurementsignals.

Characteristics

Warranted

Bandwidth DC to≥20 MHz(-3dB).Derate with Frequency. See Figure 1. (Calculatedfrom RiseTime BW= .35/Rise Time)
Rise Time ≤17.5 ns
Max RMS Current 150 A
Max Peak Pulse Current 500 A
Minimum Sensitivity 5 mA(onoscilloscope’s1 mV/div setting)

AC Coupling (on oscilloscopes thatsupportAC/DCcoupling)

Current Ranges 25 A and150 A
Max Bare Wire Voltage 600 VRMSCATI& II

300 VRMSCATIII



Typical

DC Accuracy ±1% Typical

3% Warranted

MaxAmp-SecondProduct    
  25ARange 3,000 AµS
  150ARange 15,000 AµS
Insertion Impedance 0.03 Ω @ 1 MHz
0.075 Ω @ 5 MHz
.125 @ 10 MHz
.3 @ 20 MHz
SignalDelay  21 ns
DisplayedRMSNoise ≤500μARMS(probeonly)


Environmental

Temperature
   Operating 0ºC to +50ºC
  Non-operating -40ºC to +75ºC
Humidity
   Operating 5% to 95% RH(RelativeHumidity)at up to +30ºC

5% to 85% RH above 30ºC upto+50ºC,non-condensing

  Non-operating 5% to 95% RH(RelativeHumidity)at up to +30ºC

5% to 85% RH above 30ºC upto+75ºC,non-condensing

Altitude
   Operating Up to2,000 meters(6,560feet)
  Non-operating Up to12,000 meters(40,000feet)


Physical Characteristics

  kg lbs
Shipping Weight .7865 1.734
Dimensions meters inches
Cable Length 2 meters 79 inches
Probe head size        
   Length 26.8 cm  10.55 in.
   Width 4.1 cm 1.6 in.
   Height 15.6 cm 6.13 in.
Max Conductor Diameter 21 mm x 25 mm 0.83 in.x1.0 in.
Power Requirements TCP0150ispowereddirectly by the DPO4000, MSO4000 and DPO7000Seriesoscilloscopesusing TekVPI interface


Recommended Oscilloscopes

DPO4000, MSO4000, and DPO7000 Series oscilloscopes withTekVPIprobeinterface.

Note: Requires DPO7000Series Firmware Version 3.0.2orgreater.Requires DPO4000/MSO4000 Firmware Version2.06orgreater.

Figure 1.

Figure 2.

Figure 3: Do not apply currents greaterthanthemax continous current for more than 10 seconds tominimizeheatingeffects.

AC/DC Current Probe with TekVPI Interface.

Includes: Protective Cover(016-1924-xx),andCertificate of Traceable Calibration and DataStandard.

Option Order
Option L0 StandardEnglishLanguage Instruction Manual (071-xxxx-xx)
Option L5 SubstitutesJapanese Language Instruction Manual
Option L7 SubstitutesSimplified Chinese LanguageInstructionManual


Recommended Accessories

Accessory Order
CurrentLoop,1 Turn,50 Ω with BNC connector usedforPerformanceVerification 015-0601-50
TekVPICalibrationFixture 067-1701-xx
Cal/DeskewFixtureforDPO7000/70000 Series 067-1686-xx


Service Options

Option Description
Opt. CA1 Providescoveragefor a single Calibration Event
Opt. C3 Calibration Service 3 years
Opt. C5 CalibrationService5 years
Opt. D3 CalibrationDataReport 3 Years (with Opt. C3)
Opt. D5 CalibrationDataReport 5 Years (with Opt. C5)
Opt. R3 RepairService3Years
Opt. R5 RepairService5Years

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
扫描二维码访问

粤公网安备 44030702000865号